InLine® Multimeter Dual-Display, with PC connection via USB, CAT III / CAT IV

Multimeter with dual display, for measuring voltage, current, resistance, capacitance, frequency, continuity test, temperature. Digital multimeter with PC connection for recording and logging of measured values. This device complies with IEC 61010-1:2001, CAT III 1000V and CAT IV 600V overvoltage standards. The dual-display display shows the measured values digitally in digits and analogue as a bargraph, e.g. to better display fluctuations in the measurement.

• Display: 2x 4 digits, resolution 6600 + bargraph
• connect to the PC via USB port (Windows software)
• True RMS measurement (effective value measurement)
• Relative measurement
• Automatic switch-off
• Hold data
• LED backlight
• Auto / manual range selection
• Low power display
• Diode / continuity test
• Measuring ranges / tolerances:
• Direct voltage (DC): 660mV/±0.5%, 6.6V/66V/660V/±0.8%, 1000V/±1.0%
• AC voltage (AC): 660mV/6.6V/66V/660V/±1.0%, 1000V/±1.5%
• Direct current (DC): 660µA/6000µA/±1%, 66mA/600mA±1.5%, 10A/±1.8%
• Alternating current (AC): 660µA/6000µA/±1.5%, 66mA/600mA±1.8%, 10A/±2
• Widerstand: 660Ohm/6,6KOhm/66KOhm/660KOhm/6,6MOhm/±1,2%, 66MOhm/±2%
• capacitance: 6.6nF/±5.0%, 66nF/660nF/6.6µF/±3.0%, 66µF/660µF/3.3mF/±5.0%, 66mF/>±5.0%
• Logic frequency: 6Hz~66MHz ±(0.1% +3)
• Power frequency: 6Hz~66kHz ±(0.05% +8)
• Duty cycle: 1% ~ 99%
• Temperature: -55°C ~ 0°C/± 5.0%, 1°C ~ 1000°C± 2.0%
• Requires 1x 9V block (included)
• Dimensions: 195x90x50mm, weight: ca.500g
• Package contents: Multimeter, test strips, USB connection cable with coupler, temperature sensor, 9V battery, software CD