InLine® Gigabit Network Switch 16-Port, 1Gb/s, 19" 1U, metal, fanless

This gigabit switch is easy to install and will help you expand your network quickly and reliably. All sixteen ports auto-sense the speed of connected devices and support Auto MDI/MDI-X crossover detection, so you don't have to worry about the type of cable you're using. Each individual port negotiates its optimal speed and operation in half or full duplex mode. Fast store-and-forward switching prevents corrupted packets from being passed onto the network. Supports IEEE802.3az Energy Efficient Ethernet (EEE), reduced power consumption through cable length detection and automatic signal strength. This helps to reduce energy consumption and protect our environment.

• Chipsets: RTL8382L + RTL8218D + 2x RTL8231
• Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3x Full Duplex and flow control, IEEE 802.3az Energy Efficient Ethernet (EEE)
• Ports: 16x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X
• LED indicators: PWR, LNK/ACT
• Network cable: 10BASE-T: UTP category 3, 4, 5 cable or higher (= 100m)
• 100BASE-TX: UTP category 5, 5e cable or higher (= 100m)
• 1000BASE-T: UTP category 5e cable or higher (= 100m)
• MAC address table: 8K, automatic learning, automatic updates
• Jumbo Frame: 9216 bytes
• Transmission type: Store-and-forward
• Bandwidth: 32Gbit
• Dimensions ( W x D x H): 480x180x44mm
• Weight: approx. 2.15 kg
• Voltage consumption: 100~240V AC, 50/60Hz
• Power consumption: max 21 watts
• Ambient conditions: operating temperature 0-40°C, lag temperature -40-70°C, operating humidity 10-90% non-condensing, storage humidity 5-90% non-condensing